Lead-Free Environmental Protection Oxide Removal Soldering Iron Tip Resurrection Paste RELIFE RL-461

01.We performed the soldering head repair operation on the ss-004e heating pad.This heating pad works great,high temperature resistance, corrosion resistance, odor-free, easy to clean...

02.The soldering iron head is gently placed in the ointment and waits a few seconds to complete the repair.Repair can be repeated 2 to 3 times if necessary.

   Notice:The soldering iron head can not be repaired without heating.

03.After using the ointment, gently wipe the soldering iron head on a wet sponge,use the   RL-461 to repair no damage.(The surface of the soldering iron head is coated with an alloy heat conducting layer, which effectively protects the copper conducting core inside).

Resurrection effect：

Tip: When soldering iron is not used, please apply tin    layer protection on the surface of the soldering iron.

Why use RL-461 TIP REFRESHER to remove oxide layers?

1.The removal of oxide layer is effective

2.The damage is small.

3. Protective iron head alloy layer

4.Simple and convenient

The surface of the soldering iron is coated with an alloy thermal conductive layer to protect the inner conductive copper core.

Polishing and removing the oxide layer directly damages the tip!

RELIFE, creating better welding materials

Just for the repair master

Precautions：

1. Regeneration operation when the tip temperature is 300 °C~360 °C.

2. Let the soldering tip and the resurrection cream repeatedly rub for a few seconds.

3. Clean the tip with solder sponge or copper wire.

4, plated with a new solder wire layer, the soldering tip can be  clean and new.

If the effect of the regeneration is not obvious, repeat the steps 3-4 times until the desired effect is achieved, and then apply a new solder wire layer.